Foundation Repair is very important to the structural integrity of your home. It prevents your walls from suffering from damage due to natural disasters, such as earthquakes and hurricanes, as well as from harm caused by human error, careless maintenance and vehicle traffic. Without proper foundation maintenance, your home could eventually succumb to collapse, leaving you and your family without a valuable investment. Luckily, Foundation Repair can be accomplished fairly easily and with minimal disruption to your day-to-day life. https://garlandfoundati.livejournal.com/451.html
Foundation Repair is achieved by excavating around your house and then filling in any cracks and porous areas, like the base of a garage door. Then, a thick layer of solid, expanded clay or soil is poured in over the excavated areas. The soil, which is colored depending on the condition it’s in, is then compacted. A slurry pump is used to mix the soil, which expands as it sets, and add enough water to fully set the foundation repairs.
Foundation Repair Garland TX
After the soil has been mixed, the next step in slab foundation repair is to excavate around the house once more, this time around the perimeter and corners. Again, a thick layer of soil or expanded clay is poured in to completely set the area. This „slab“ is then firmly pressed into place and then another layer of soil/expanded clay is added to make sure that it’s completely saturated. And, finally, another slurry pump is used to complete the repair.
There are basically two ways to complete slab foundation repair jobs: wet and dry. Dry repairs simply use pumped concrete slabs. In wet repairs, a special mixture is made that includes cement, water, and sand to fully set the concrete slabs. The slabs are then left to dry overnight and slowly prepared for the day. For any moisture that might occur, special pumps are used that pull out the water.
Slab foundation problems aren’t the only type of foundation problems, however. You might also hear of beam foundations. These are foundation problems that occur when a portion of the house moves towards or away from the site. Usually this happens during strong storms or when the home is built on a sloping site. When this happens, there’s not much you can do until the soil settles again. If you have slab foundations, you may be able to pour concrete slabs in the spot to fix the problem.
There are different methods used for repairing beam foundations, but some of the most common ones include: digging up the entire foundation and placing beams where the cracks are located. This approach requires a trench to be dug, then concrete poured to cover up the cracks. In some cases, beams may be put into the cracks themselves. This can make repairs easier because the work area will be protected from the elements.
On-site concrete repair isn’t always necessary, especially if your home has already been built. There are, however, a few instances when you might need slab foundations to be repaired. If you’re building a new home on a concrete slab, you’ll likely need to replace the slab once it becomes damaged. To save money on your initial foundation settlement, you can opt to repair any damaged portions of the foundation yourself.
Foundation cracks can be a pain, no matter how you slice it. They can get worse over time, which means more frequent repairs. Even the smallest holes could potentially cause flooding later on down the road. That said, having your foundations checked out by a professional could mean you avoid future problems with these types of repairs. You might even find that you can fix small problems yourself, saving money and time in the long run.